|
Automotive Price List
This Price sheet is for a general reference only. Please stop by with your items for a more accurate quote.
frame welding, grinding, and filling is also available. Please contact us for more information.
Item |
Cost |
|
Item |
Cost |
A-Arm (Upper/Lower) |
45.00 |
top of page
top of page
|
Intake Manifold (no heat riser) |
|
Air Cleaner Covers (2 piece) |
|
Typical V6 or V8 |
75.00 |
Small |
35.00 |
Tuned Port Injection |
175.00 |
Medium |
45.00 |
Master Cylinders |
|
Large |
55.00 |
Brake |
30.00 |
Alternator Housings |
45.00 |
Clutch |
30.00 |
Axle (Housing Only) |
150-250.00 |
Nerf Bars for Pickup/Jeep |
100-175.00 |
Bolt Heads |
|
Oil Pan |
50.00 |
Small 3/8 & Under |
1.00 |
Pulleys |
15.00 |
Large 1/2 & Up |
2.00 |
Power Steering Box |
60.00 |
Battery Box |
|
Radiator Core Supports |
|
Small |
20.00 |
Typical Passenger |
60.00 |
Large |
30.00 |
Large Passenger/Truck |
90.00 |
Brakes |
|
Rad Holddown |
20.00 |
Disc. Rotor (Non-drilled) |
60.00 |
Rearend |
150-250.00 |
Disc. Rotor (Drilled) |
90.00 |
Roll Bars |
|
Disc. Back Plate |
20.00 |
2-Point |
50.00 |
Disc. Caliper |
50.00 |
2-7 Point |
150.00 |
Brake Drum |
50.00 |
2" Tube x 16' |
55.00 |
Brake Drum Back Plate |
35.00 |
Spindles (Masked Races) |
30.00 |
Brackets |
|
Springs |
|
Small |
5.00 |
Coil ($/each) |
35.00 |
Medium |
10.00 |
Leaf incl. clamp & bolt ($/e) |
75.00 |
Large |
15.00 |
Stabilizer |
|
Bumpers |
|
Sway Bars |
45.00 |
Standard |
75-90.00 |
Pan hard Bar |
45.00 |
Brush Guard Bumper |
100-175.00 |
Thermostat Housing |
15.00 |
Truck Bumper |
100-175.00 |
Third Member |
75.00 |
Chassis |
|
|
|
Small Passenger/Street Rod |
350.00 |
Timing Cover |
30.00 |
Typical Pass./Street Rod |
350-450.00 |
Transmission Housing |
|
Large Passenger/Truck |
550-650.00 |
Automatic |
200.00 |
Subframe |
250-300.00 |
|
|
Cylinder Block V8 |
200.00 |
Manual |
100.00 |
Cylinder Block V6 |
175.00 |
Transmission Pan |
20.00 |
|
|
Trailer Hitch |
75.00 |
Cylinder Heads V6 & V8 ($/ea.) |
150.00 |
U-Bolts ($/each) |
15.00 |
Cylinder Heads Straight V6 |
125.00 |
Valve Covers (Plain) |
|
Drive Shafts per/ ft |
6.00 |
6-cylinder ($/each) |
45.00 |
Fan 4 blade |
35.00 |
V8 ($/pair) |
60.00 |
Fan Shroud |
30-45.00 |
|
|
Fender Wells (Inner Panels) |
|
Wheels |
|
Typical ($/each) |
60.00 |
Standard Steel 15" |
45.00 |
Large ($/each) |
75.00 |
Cast Aluminum 14" - 20" |
65-100.00 |
Undercoating removal extra |
$25/hr |
Cast Magnesium 14"-16" |
85.00 |
Half Shaft each |
45.00 |
Wire Wheels |
90.00 |
Headlight Bucket |
25.00 |
Knock Offs |
45.00 |
Headlight Ring |
20.00 |
Wheels PC - Centers Only |
120.00 |
Hood Hinge (Typical & Dom.) |
30.00 |
Wheel Centers Only (3 pc.) |
25.00 |
Center link |
35.00 |
Lug Nut ($/each) |
2.00 |
Jack Stands ea. |
20-45.00 |
Windshield Wiper Arms |
20.00 |
License plate frame |
20.00 |
|
|
Keep In Mind:
- Above prices do change from what may be list but prices do include abrasive blasting, masking of all threads, preparation, and powder coating using a stock color.
- Cast aluminum, cast iron, and magnesium parts may experience an out-gassing and/or bubbling in the finished powder coat. We will take every precaution to avoid out-gassing, however, we can't be held responsible for bubbling caused by porous castings.
- Silver and metallic base coats require a clear top coat, along with any glitter or translucent colors. These keeps the base coat from oxidizing. Additional charges may be added
- All parts must be disassembled along with being oil and grease free or a cleaning fee will be charged.
Back to the top
|
